Home > Web Seminars  

Bracing of Large Buildings©, Field Modifications of Steel Frames©, and Web Holes©

	Not currently scheduled
Seminar No.	C-305W
Credit:	3 PDH
Schedule:	Not currently scheduled.  Please register your interest using the form below
	Can't attend? We'll notify you the next time this seminar is scheduled. Email Address:

Overview   This three-subject webinar presents interrelated issues that impact the construction and design of buildings.  Expect a lively discussion about these crucial issues in a seminar led by an industry expert.   Subjects to be covered in this presentation include: Bracing of Large Buildings Field Modifications of Steel Frames Web Holes     Meet your Moderator How Web Seminars Work             Learning Objectives     FIELD MODIFICATIONS OF STEEL FRAMES© In this session, you’ll learn…. How to field reinforce of steel frames to reduce deflections and accommodate loads such as cranes not anticipated in the original design  How to modify of frames to accommodate additional headroom above floors and bleachers; cranes, duct work, cable trays;  vehicular traffic   BRACING OF LARGE BUILDINGS© In this session, you’ll learn…. A convenient method of analyzing bracing in roofs Various systems for bracing walls of buildings Alternate means often required due to interference of openings and building equipment WEB HOLES© In this session, you’ll learn…. Methods of designing and detailing the reinforcing around a hole in the web of a steel beam or girder to allow passage of: o Duct work o Mechanical equipment o Cable trays

To attend this web seminar, you'll need a computer with a high speed internet connection (DSL or cable modem) and a phone line.  For your comfort, it is recommended that you use a speaker phone to connect to the web seminar.

Online registration ends 1 hour prior to the seminar, however phone registration can be accepted up to 10 minutes before the webinar begins. Please call 877 500-7145 (toll free) for last-minute registration.   Seminars fill up fast.  Register early to reserve your spot!

Twenty-four hours prior to the webinar, you will be emailed a web address for the webinar.  On the day of the seminar, simply go to the website provided in the e-mail (you should be able to just click on the link in the e-mail).  You will be asked to enter your name and e-mail address.  And you will need to enter the password that was also sent to you in the e-mail.  Once you have logged in, a screen will pop up with the toll-free number to call. Please try to log in at least 5 minutes prior to the webinar as we will start promptly.

After completion of the web seminar, you will need to fill out a short online questionnaire to access your certificate of completion.  The questionnaire can be accessed immediately after the seminar through your login account.  In the questionnaire, you will assess how well the seminar achieved the stated learning objectives.

You may cancel your enrollment in this web seminar up to 48 hours prior to the seminar with a full refund, minus a $10 registration service fee.  Cancellations made less than 48 hours prior to the seminar, but at least 4 hours prior to the seminar will not be refunded, but will be credited towards future seminars.  Cancellations made less than 4 hours prior to the seminar are not refundable.

Web seminars earn PDH credits for engineers in all states unless specifically stated otherwise in the literature for a specific seminar.  PDHengineer.com is an approved provider of continuing education for engineers.  For more details, check out your state requirements.

ATTENTION NEW YORK ENGINEERS: This web seminar has been accepted by the state licensing board and will fulfill the "live course" requirement.