|
Would you rent a 10
ton truck, when a 5 ton truck would do the job? Every month? Year
after year?
Well, thats exactly what
youre doing with your electric company. When the electric loads in your
plant have a Power Factor lower than 1 (or Unity), you pay a higher demand
charge (or rent) for the equipment that delivers power to you.
This higher demand charge
can cost your company tens or even hundreds of thousands of dollars per year
or more in higher energy costs.
Learn how Power Factor
works and how to design for Power Factor Correction when installing new or
refurbished equipment in your facility.

In this 2 hour web-based
seminar, you'll learn....
-
Review of AC & DC circuit theory
-
The inevitable voltage and power
losses that occur whenever electrical power is transmitted from one
place to another
-
How power flows as a sine wave of
double the line frequency
-
How current and power flow are
different in resistive, inductive and capacitive circuits
-
A practical real world example of
power factor correction
-
Considering power factor when
specifying, purchasing and installing equipment

To attend
this web seminar, you'll
need a computer with a high speed internet connection (DSL or
cable modem) and a phone line. For your comfort, it is recommended that
you use a speaker phone to connect to the web seminar.

Online registration ends
1 hour prior to
the seminar, however phone registration can be accepted up to 10 minutes
before the webinar begins. Please call 877 500-7145 (toll free) for
last-minute registration. Seminars fill up fast. Register early to reserve
your spot!

|
Accessing the Web Seminar |
Twenty-four hours prior
to the web seminar, you will be emailed a web address and access code to
link to the web seminar. Prior to the webinar, you must visit the
specified website to perform a browser check to assure you are running a
supported version of Java. On the day of the seminar, simply dial the
toll free number and enter the web address a few minutes before the
scheduled start time.

|
Printing Your Certificate |
After completion of the web seminar, you will
need to fill out a short online questionnaire to access your certificate of
completion. The questionnaire can be accessed immediately after the
seminar through your login account. In the questionnaire, you will
assess how well the seminar achieved the stated learning objectives.

You may cancel your enrollment in this web
seminar up to 48
hours prior to the seminar with a full refund, minus a $10 registration
service fee. Cancellations made less than 48 hours prior to the
seminar, but at least 4 hours prior to the seminar will not be refunded, but
will be credited towards future seminars. Cancellations made less than
4 hours prior to the seminar are not refundable.

Web seminars earn PDH credits for engineers in
all states, unless specifically stated otherwise in the literature for a
specific seminar. PDHengineer.com is an approved provider of
continuing education for engineers. For more details, check out your state requirements.

ATTENTION
NEW YORK ENGINEERS: This web seminar has been accepted by the
state licensing board and will fulfill the "live course" requirement.

|