Alternating Current Motors and Generators (Ohio T&M)

In Alternating Current Motors and Generators , you'll learn ...

• Alternator construction methods and operation
• The difference between delta and wye connections in a 3-phase alternator
• The three basic types of AC motors and the characteristics of each type

Overview

To meet the Ohio Board's intent that online courses be "paced" by the provider, a timer will be used to record your study time. You will be unable to access the quiz until the required study time of 150 minutes has been met.

Credit: 3 PDH

Length: 44 pages

An alternating current generator, or alternator, produces an alternating current, which means the voltage produced alternately reverses from positive to negative polarity, producing a corresponding change in the direction of current flow. Much like a DC generator, an alternator requires a coil to cut across the force lines of a magnetic field. This coil is attached to two slip rings, which deliver the current to and from the load destination, thus completing the circuit.

The magnitude of AC voltage generated by an alternator is dependent on the strength of the magnetic field (number of lines of force), the speed at which the loop rotates, the number of loops of wire that cut the magnetic field.

A rotation speed of 3000 revolutions per minute (RPM) produces 50 Hz, and 3600 RPM produces 60 Hz. The electric current in North American homes has a frequency of 60 hertz, while in Europe it is 50 Hz.

An alternating current motor, or AC motor uses electrical energy to produce motion and torque. Very simple AC motors are called "Squirrel cage motors"; these have only one or more stationary coils within which a special kind of mechanical rotor is free to rotate. There is no electrical connection to the rotor from the outside. Most AC motors require a starter, or method of limiting the inrush current to a reasonable level. Types of motor starting include reactive (capacitor start and inductive start), and electronic (frequency drives and soft start drives). The reactive start method is usually used on fractional horsepower motors, and the electronic method is usually reserved for larger motors.

This 3-hourr course provides a basic understanding of AC motors and generators, explaining how to use them, how to calculate power, and determine torque considerations.

Specific Knowledge or Skill Obtained

This course teaches the following specific knowledge and skills:

• The principle of magnetic induction as it applies to AC generators
• The differences between the two basic types of AC generators
• The factors that determine the maximum power output of an AC generator
• The relationships between the individual output and resultant vectorial sum voltages in multiphase generators
• The factors that determine the frequency and voltage of the alternator output
• The purpose and procedure of parallel generator operation
• Three basic types of AC motors and the characteristics of each type
• The characteristics of a series motor that enable it to be used as a universal motor
• The primary application of synchronous motors, and the characteristics that make them suitable for that application
• The features that make the AC induction motor the most widely used of electric motors

Certificate of Completion

You will be able to immediately print a certificate of completion after passing a multiple-choice quiz consisting of 20 questions. PDH credits are not awarded until the course is completed and quiz is passed.